ICS Company Logo. Industrial Contractors Supplies

Dust Director Logo.

20 Diamond Deal   Home of the 20 Diamond Deal   20 Diamond Deal

Call the Dust Director. 1-412-824-6933

Concrete & Masonry - Silica Dust & Slurry Control - Products & Solutions.



Product Brochures

Company Literature




Dust Guards, Saws

Blowers, Dust Socks

Grinders, Respirators, etc.



Silica Dust Extraction
Wet/Dry Models
Slurry & Sludge Extraction

Replacement Filters, Hoses, Cuffs, Separators, etc.



Slurry, Sludge, Flood Reclamation - Relocation, Filtration, Disposal.

Slurry Press Machines

--  Polymers  --
Super Absorbent


Blades, Cup Wheels
Surface Cleaning + Polishing
Coatings & Joint Sealant Removal




 Slice or Scrape
but don't grind ~

Joint Sealant
Coatings Removal
"Without Melting"

Carbide Drill Bits, Chisels, Scrapers Makita Power Tools
Drilling, Demolition, Saws, Dustless Drilling Attachments

Floor Machines --- Dust & Slurry Control
Why Use Larger & Heavier Machines?  Get Off Your Knees! 
Multi-Use Compact Portable Heavy-Duty

Abrasives & Wire Wheels


Floor Machines   >   Slurry DeWatering Products   >   Gansow Automatic Floor Scrubbers.








A newly installed concrete floor.Contractors!  Are you walking away from all of your hard work and effort of transforming old, worn and damaged floors into downright beautiful works of art . . . And leaving an outside cleaning company the easy and profitable work of maintain your work of art?

Transforming or installing a harden and polished surface takes know-how, machines, equipment and time.  But once installed, maintaining any polished surface is relative easy and inexpensive, but it has to be done.  

Consider This:  You have all the equipment, supplies and knowledge, and no one knows that particular floor better than you . . .  You simply have to bring it to the owner's attention that the surface needs maintained  -  Regularly if not daily.  And you can create and do the Maintenance Schedule for him --- Easily, quickly and economically using an ECS Automatic Floor Scrubber. 



28", Gansow Auto Scrubbers - CT 180 RPM & ECS 2-Speed 180 & 600 RPM Machines.ECS - Economy Cleaning System ~ 2-Speed Automatic Scrubber

Why use a tradition 180 rpm single speed auto scrubber when an ECS Auto Scrubber gives you so many more options, versatility, productivity and savings:

>  Used as a "traditional" scrubber at 180 rpm to Clean, Scrub and Extract Concrete Slurry

>  Switch to its 600 rpm high speed mode for Easy & Impressive Cleaning, Polishing and Productivity during Floor Maintenance.  



The benefits of High Speed 600 RPM Auto Scrubbing:


Water and chemical consumption are reduced 80-90%!  The 600 rpm speed offsets the use of water considerably . . .


By using less water, floors dry significantly faster which means they are available for immediate foot and vehicle traffic sooner.  This is a major benefit for liability insurance when you consider "slip and fall" accidents.


Besides the environmental savings of using 80-90% less water (and chemicals), your labor is reduced 30-50% simply because you are NOT "dumping and refilling" an ECS machine nearly as often.


With a 3:1 increase in speed (180 vs. 600 rpm), the floor's shine will be 3 times greater - each time you clean!



180 & 600 RPM ECS Automatic Floor Scrubbers

For Slurry Extraction, Cleaning, Scrubbing & Polishing

Manufactured by IPC Gansow – The World's Fastest Growing Manufacturer of Automatic Scrubbers in the World.

ECS 2-Speed Auto Scrubbers - 180 & 600 RPM

14", Gansow Auto Scrubbers - CT 180 RPM & ECS 600 RPM Auto Scrubbers. 28", Gansow Auto Scrubbers - CT 180 RPM & ECS 2-Speed 180 & 600 RPM Auto Scrubbers.
14" Auto Scrubbers 28" Auto Scrubbers



14" ECS Gansow Auto Scrubber

14" Auto Scrubber

Purchase your selection(s) and click the Buy Now button to add or save your item(s) to the Shopping Cart.  Once added, you can add or delete any items or change the quantities.

14" Auto Scrubber - Recommended for Floors under 10,000 Sq. Ft.

$2,400.00      ECS Model, #CT15ECS.  Brush Drive.  Single 600 RPM Speed.  33 Amp Hour Battery provides 1 hour of continuous run time --- Scrub over 10,000 sq. ft. per charge.  4Gal Solution, 5 Gal Recovery Tank.  Dimensions:  80 lbs., 29" x 16" x 21".   Brush, Battery and Charger included. 

The most compact battery powdered automatic floor scrubber on the market!  Featuring a fold down handle for reaching under tables, desks and counters.  Always ready to go, the CT15 / ECS makes mops and buckets obsolete!  With a working cleaning path of 14", the CT15ECS scrubber is extremely quiet at only 69 decibels – Ideal for small facilities with numerous obstructions, this scrubber cleans hard-to-reach areas under tables, sinks and desks.

Compact design, on-board solution tank, forward spray jet, powerful vacuum and easy-empty recovery tank will tackle any spill at a moment’s notice.  The convenient on-board battery charger provides one hour of continuous operation.  The ECS Model, as one contractor stated, "Is one heck of a scrubber at 600 RPM's."

Squeegee Information, Accessories
The Scrub Brushes & Pad Drivers are all interchangeable between the 5 Models.

 < See Below >

3" Resin Pads being pressed-on to a 14" velcro pad driver.Standard & Diamond Impregnated Floor Pads14" Nylon Scrub Brushes.


28" ECS Gansow Auto Scrubber

28" Auto Scrubber

Purchase your selection(s) and click the Buy Now button to add or save your item(s) to the Shopping Cart.  Once added, you can add or delete any items or change the quantities.

Easy to use and follow control panel - a real work horse.

Testimonial:  While at the scrubber training school (a 3 day session), the scrubber accidentally fell off the mezzanine (a good 30' drop).  After inspection, we turned it right side up, turned it on and drove it away . . .

While one of the sales pitches on the Gansow Scrubbers is their "roll form molding," I personally know they never gave it that kind of test.

- Theodore R Segiel, Jr.


28" Auto Scrubber - Recommended for Floors under 20,000 Sq. Ft.

$5,500.00       ECS Model, #CT70ECS.  Two Speed 180 RPM & 600 RPM.  Two (2) 6 volt batteries for 145 Amp Hours or 2.0 Hours of Run Time --- Scrub over 35,000 sq. ft. per charge.  19 Gal Solution, 20 Gal Recovery Tank.  Dimensions:  194 lbs., 48" x 30" x 38".  Self-propelled forward and reverse.   Brushes (2), Batteries (2) and Charger included. 

Compact, High Performance Machines that will handle 95% of all your floor care needs.  From the flooring professionals to independent business owners, the CT70ECS provides the features, performance and size for exceptional productivity in both tight areas and wide open spaces.  This versatile dual pad & brush machine will go where larger scrubbers can’t while cleaning floor better and with less cost. 

With two speeds (180 and 600 rpm), the CT70ECS provides you with a traditional scrubbing machine (@180 rpm) and all of the benefits of an ECS machine when used @ 600 rpm.  Complete with SLS (Self Leveling System) to automatically adjust brush pressure.

Squeegee Information, Accessories
The Scrub Brushes & Pad Drivers are all interchangeable between the 5 Models.

 < See Below >

3" Resin Pads being pressed-on to a 14" velcro pad driver.Standard & Diamond Impregnated Floor Pads14" Nylon Scrub Brushes.



Economical Cost Cleaning Solutions.The ECS Advantage:

Double Your Productivity, Triple Your Shine . . .

Reduce Labor 30 - 50% AND Chemical & Water Usage by 80 - 90%!


Everyone Needs a Floor Maintenance Program

	And the ECS High Speed Scrubbers Do It All . . .

Performs Like a Traditional Auto Scrubber ~

But Polishes the Floor as it Cleans . . .

Concrete floor cleaning & polishing. Finished Results - Costco Store.


Economical Cost Cleaning Solutions.High Speed Automatic Scrubbers - A Mechanical Approach instead of using Chemicals and Labor.  The 600 rpms offsets the use of water, chemicals and time:

 · Water & Chemicals are reduced by 80% - 90%
 · Labor is reduced by up to 30 - 50%

Eco-Friendly  ~  Mechanically Cleaning & Polishing without Chemicals (or with at least 80 - 90% less).


"Maintained" Clean & Shiney Floor.600 RPM High Speed / Mechanical Approach
A mechanical approach to cleaning and maintaining a floor.

Additional Benefits:
 · Over three (3) times faster than a traditional auto scrubber
 · Produces 3 times the gloss in half the time
 · Using impregnated diamond pads plus the higher 600 rpm speed is incredible vs. a traditional 180 rpm scrubber

The ECS High Speed or Mechanical Cleaning Approach reduces both chemical and water consumption by 80-90% WHILE reducing labor time by 30-50%!



Greenest Automatic Floor Scrubbing Machines on the Planet.The Ultimate Greenest Machines on the planet - And in your budget!

Whether you are creating a new look polished floor or maintaining an existing floor, the ECS High Speed Scrubbers create and maintain the life of your floor from start to finish.


ECS 600 RPM Auto Scrubbers - The world's 1st Automatic Scrubber that Cleans and Increase the Floor's Shine Every Time to Clean.

Clean, Scrub, Vacuum & Polish Floors - A unique, intelligent & extremely cost effective design that enables you to Clean, Scrub and Increase a Floor's Shine In Just One Pass!


ECS - Economy Cleaning System ~ An Additional Economical Advantage:

CLEAN IN THE DAY TIME - DURING BUSINESS OPERATIONS.  Businesses today are looking to save in everyway possible.  By allowing cleaning crews to clean during the day, heating bills are reduced as well as reducing any extra security.

When an ECS Scrubber is used during daytime operations, by using 80 - 90% less water and chemicals - and with one of the best, if not the best
"V-Grooved Squeegee", drying time is the absolute fastest in the industry.



High Speed Cleaning & Polishing Auto Scrubbers.Battery Powered High Speed ECS Automatic Floor Scrubbers.  Both models are compact high performance machines that will accommodate over 95% of all your floor care needs.  For the flooring professional to independent business owners, these two models provide the features, performance and size for exceptional productivity in both tight areas and wide open spaces.

From the highly maneuverable and compact CT15ECS to the extremely productive CT70ECS, these two machines are designed for easy operation, maintenance and are very affordable.



Squeegee Information, Accessories. 

Tradtional Scrubbing to High Speed Cleaning, Grinding, Polishing.Exclusive Squeegee System assures high performance - Equipped on All 5 Models.

Incomparable  drying results even on the most difficult surfaces due to a very unique design.  Blades are used on 4 sides before replacement.

No Tools to Install or Remove the Squeegee nor to change the Blade's Pitch Adjustment.  You want a slight backwards bow on the squeegee.  Loosen the two (2) nuts in the middle of the squeegee's holder to adjust.

High Performance for Fast Drying:
·  V shape squeegee collects all of the water
·  Width of squeegee is exactly the same along its entire width allowing for excellent drying results in every area
·  Reduced blade wear as the squeegee height is maintained by 2 rear roller wheels
·  Roller wheel height adjustment allows for maximum blade wear life.
·  Individual blades are completely interchangeable and all 4 sides are useable for incredible long life.


The following Pads, Brushes and Drivers are Interchangeable between the 5 Machines.


14" Velcro Full Coverage Pad Driver.Resin & Semi-Metal Polishing Pads, 3mm - 3", 4", 5", 7" Diameters.For use with Velcro Diamond Polishing Pads (3mm thickness) to lightly sand and transform dull concrete and stone floors into polished surfaces.  The entire bottom of the driver is covered with a velcro like material called "Applix".  

3" Resin Pads being pressed-on to a 14" velcro pad driver.The diamond polishing pads stick to the driver via the Applix / Velcro style hook and loop material.  A rubber cushion is also installed to reduce the driver from tearing should uneven floors be encountered (often called, lippage).

P/N: SPPV01339   Price:  $170.00 ea    (The 28" models requires two (2) pad drivers).  

To order and the various types, sizes and grits Diamond Polishing Pads,  < Click Here >


Bristle Pad Driver w/ Center Lock Nut for Pads.Diamond Impregnated Floor Pads14" Bristle Pad Driver with Center Lock Nut.  This driver is used with standard and burnishing (HT) floor pads, DiamaPads (diamond impregnated pads) to clean and polish at the same time.  This Pad Driver is included with each ECS machine.

P/N: SPPV01273   Price:  $171.00 ea    (The 28" models requires two (2) pad drivers).  

For additional information and ordering DiamaPads (select 14" diameter),  < Click Here >
Note:  Either machine (14" and 28") uses 14" DiamaPads.


14" Nylon Scrub Brush - Medium Stiff.14" Nylon Scrub Brushes.  (The 28" models requires (2) brushes).
Medium Bristle Brushes are included with each machine.

Medium (Standard) Bristle   $ 141.00 ea    

Semi-Stiff Bristle   $ 100.00 ea    

Softer (Delicate) Bristle.  $ 155.00 ea    


Micro Fiber Pads, 14" - for use on the ECS Machines.
For micro cleaning & shining of smooth floors.   Micro Fiber Pads install with the above Velcro Pad Driver (#SPPV01339).

Micro Filber Scrub Pad.Scrubbing & Cleaning Pad - Yellow & White.  $ 44.00 ea    #SPPV01264 

Micro Fiber Shine Pad.

Shining, Buffing or Dusting Pad - White & Blue.  $ 56.00 ea    #SPPV01265   



 Join our email list!  Sign up and be the first to hear about Special Pricing, New Products, Demo Inventory and More!

Products manufactured and marketed by and for Dust Director® are protected by patents issued or pending in the United States and other countries.  Dust Director® is a registered US patent and trademark owned by Dustless, Inc., an independently owned and operated company;  all pictures, names and logos reserved.

15061 Route 30
N. Huntingdon, PA  15642
Ph:  412.824.6933
Fax:  412.824.4704

E-Mail ICS - With comments, product questions, etc.