Operation:  How It Works, Features, Video

SLURRY EXTRACTION:

Reverse Flow Lever:

Pushed inwards (picture left, top arrow), the turbine motor is in suction mode.

Pull outwards and the powerful suction from the turbine motor is reversed to compress and slurry, contain the solids, and discharge filter liquid.

Liquid Drainage - Using only the air produced from the machine, "filtered" liquids are drained from the collection tank.  The main advantage of this system is the elimination of problems that derive from the clogging of sump pumps that are typically used to move liquids.  

Separated / Contained Debris, Filtered Liquid Discharge - During the discharge, debris and fine particulates are filtered, separated, and contained within the collection strainer as filtered liquid is discharged.

15 Gallon Stainless Strainer Pail (below) - Installed inside the 23 Gallon Stainless Steel Collection Tank (see below pictures).

Nylon High Efficiency Filter Bag (below picture, optional to use) - Placed outside the strainer pal increases filtration efficiency up to 300 microns.

The expected collection and compaction yield of solids in the 15 Gallon Stainless Steel Strainer Pail is 120 lbs. (equivalent to two (2) 5 gallon buckets). After each discharge of liquid, there is no need to remove the Strainer Pail.  Instead, the debris is allowed to accumulate and thicken in the Strainer Pail (up to 120 lbs.). As the debris accumulates it also increases the filtering efficiency of the liquid as it is being "pushed" through the thick material and discharged.  Likewise, the turbine motor has the power to "push" the liquid through the fines as it compacts and thickens.

HD rubber float inside the strainer bucket ensures that the tank will not overflow when extracting liquids.

 

Performance meter on the motor head, for use on both dry and wet collection.

Just as the meter points to red it is your indication that suction is reduced and either the liquids need to be discharged or the cartridge filter needs to be purged (during dry pick-up).

A hand wheel on the rear of the vacuum is used to raise and lower the collection bin.

Once lowered the collection bin is unclamped . . .

Note:  The collection bin and the above cyclone tank are secured with HD stainless steel clamps.

Emptying the 23 gallon collection bin is easy as it is rolled away using its HD rubber casters (4).

· 304 Stainless Steel Construction.  The entire vacuums are constructed of stainless steel, to provide you with years of durability and professional appearance.

· Large, Heavy-Duty Wheels & Casters.  Installed on both the cart and dust bin.

· Ergonomic Profile.  Compact, vertical design provides great maneuverability