Home
> Sealant Removal
> Abrasive Silicone Carbide Grinding Wheels.
ZEK - Silicon Carbide
Grinding Disc for Coatings Removal.
Silicone Carbide Grinding
Wheels
Removes the following materials - Without Loading the Disc nor Melting the Material
Adhesives, Paint, Glues, Mastics, Epoxies - from Concrete Surfaces Additionally, the discs are also used for removing thick rust from steel (beams, concrete forms, etc.)
Surface Preparation Discs:
Coatings, Sealant, Adhesive Removal from Concrete Surfaces Fast, Aggressive Wood Grinding (removes the high spots on swollen OSB plywood) Concrete & Masonry Grinding Heavy Rust Removal from Steel Barnacles from the Hulls of Boats
|
Need to expose the bare concrete . . .
Fast?
You've tried Abrasive
Blades? Wire Wheels? Manual and Power Scrapers?
Similar Coatings Removal Discs?
ZEK - Silicone Carbide Grinding
Discs
-
Multiple layers of abrasive grains
cut through adhesive-type coatings faster while discarding the adhesive
build-up ~ to resist disc loading.
-
Removes
the adhesive-type coating then grinds the concrete surface.
-
Non-loading
Swirl Pattern design, with Cooling Vents . . . Combined with High
Quality, Long Lasting Silicon Carbide . . . provides a Superior Long
Lasting Wheel ~ "Without
Clogging".
-
Unique Grinding Disc . . .
Complete with a Heavy Duty Plastic Backing Pad . . . makes the Disc
firm, yet flexible.
-
Recessed Type 27
Grinding Wheel with 7/8" arbor. Attaches onto standard angle grinders using the
grinder's own blade clamps.
|
|
Testimonial
Expected Disc Life
"The ZEKs worked well for
removing
paint from the concrete block on our building. We stripped about
2000 sq feet of wall down to mostly bare block.
It seemed to us that we got the best
results and longer disc life by running (our angle grinders) at about
3000 RPM.
We ordered 10 discs and I think we only
used about half."
Facilities Maintenance Mgr. -
Commercial / Industrial Buildings
|
|
Testimonial
Removes Liquid Nail
Adhesive
"Removed thin and heavy liquid nail
adhesive from retaining block walls . . . without loading the disc or
melting the glue. Some of the adhesive was 1/2" thick.
We also continued grinding the concrete
block for a smooth surface on the blocks . . . One wheels lasted us
for days . . .
I'm sure your variable speed grinder on
the 1st setting also helped . . .
Landscaper -
Pittsburgh, PA
|
|
Have a large floor area that needs
resurfaced?
Use the Dust Director Versatile
18" Grinding Plate
ZEK Discs installed on 18"
Floor Plate
4-1/2" Discs install on the 5/8-11 Threaded Studs
18" Floor Surface Preparation System
for increased production . . .
Universal Grinding
Plates
18" Floor Plate attaches to standard 20" floor
machines. Using the same plate, you'll also able to use standard
diamond cup wheels, knotted wire cup brushes, and abrasive grinding
wheels and stones.
|
|
Industrial
Contractors Supplies, Inc.
