> Vacuum Systems > Wet/Dry Vacuums
> Model Overview.
AIRFlow® HEPA Filtration 3-Motor Chimney Sweep Vacuum
~ With Debris Containment Bag.
3-Motor 407 CFM
- Low 19.5 Net Amps -
Chimney Cleaning /
Air Duct Cleaning
. . . Heavy Debris, Ash & Water
Powerful, Durable, Comfortably Quiet
. . . and Compact
Heavy-Duty, Continuous Industrial Use
Includes Cooling Air Intake for Extended Motor Life.
Wet or Dry
Non-Clogging AIRFlow® HEPA Filtration
Dust + Fireplace Ash Pick-Up
Enables You to Work All Day
- Without Binding the Filter -
Collect 150 lbs. of Fine, Powder Silica Dust
- in 24 gallon HD Poly Tank -
WITHOUT FILTER CLOGGING ~ Guaranteed.
Ash Containment in AIRFlow® Filter Collection Bag
for Easy, No-Mess Disposal . . .
|AIRFlow® HEPA Filtration
· NO FILTER MAINTENANCE REQUIRED
· NO FREQUENT FILTER CHANGING
NO FILTER CLOGGING ·
· NO DUST LAYING IN
THE HOSE ·
· HEPA CARTRIDGE
FILTER STAYS "WHITE" ~ WILL NOT CLOG ·
reduce Filter Maintenance, Frequent Filter Changing, Filter Replacement
keep on working . . .
· Picks- up Fine,
Powder Concrete/Masonry Dust ~ Even Concrete Slurry ·
· With the same filter
~ Picks-up Wet or Dry - At the same Time ·
· Without Changing The
& Concrete Vacuums
AIRFlow® HEPA Filtration
Efficiency with Constant Air Flow
- through the filters & across the motors (for cooling) -
Vacuums use Less Amps
. . . A Lot
Unlike similar Chimney Sweep or Soot
Vacuums, an AIRFlow® High CFM Dust Control Vacuum also
heavy debris, ash, and liquids.
few other significant differences:
407 Cubic Feet Per
Minute (CFM) of Air Flow.
3-Motor, 3-Individual On/Off Switches. 19.5 Net Amps operating from one
Large Collection Capacity: 150 lbs. of fireplace ash - Contained in an AIRFlow®
Confidence & Versatility
. . . High
CFM Low Amp 3-Motor Chimney Cleaning Vacuum
Control the Power. Your
choice . . . you're in control . . . Turn-on 1, 2 or 3 motors from one 110 volt outlet . . . without circuit breaker overload ~ even from circuits
protected by quick-action fuses or low amp breakers.
3-Motor Head. Individual motors each with their own on/off switch ~ Used in any combination to meet the
demands of the job and to over come electric power limitations.|
Designed to operate from single 15 Amp 110 volt breaker.
Equipped with 30', 3-wire grounded line cord.
|Maximum Performance. 136 CFM, 6.5 Amps per Motor.
Turn-on all three motors to extract powder dust at an impressive 407 cubic feet per
|AIRFlow® 4-Stage HEPA Filtration. Captures the smallest of dust particles, down to
0.3 microns ~ Ensures that clean,
filtered air is returned into the room.|
Vacuum's efficiency and high suction power is maintained - from the time the AIRFlow® bag is installed to
its 150 lbs. capacity.
4-Stage AIRFlow HEPA Filtration.
4th Stage. HEPA Cartridge Filter - Washable.
Stays white ... it will hardly get dirty.
3rd Stage. Drop-down Basket Micro-Web Filter. Washable.
The inside of this filter stays white ... it will hardly get dirty.
2nd Stage. Elastic Nylon Cover Bag. Washable.
Cover the Basket Filter. It will get a light dusting on it.
1st Stage. AIRFlow Filter Collection Bag. Collects and
holds powder dust + wet slurry debris.
Filtration keeps the individual filters from binding. Ensures
constant airflow though out the filter system, thereby keeping the
motors operating efficiently. Keep the inside of the tank very
clean and provides for easy, no-mess disposal.
|1-Year Motor-Head Warranty. Parts
and labor. |
|Positive Vacuum Seal.
Beneath the motor head, a poured in-place gasket is used (as opposed
to neoprene or foam) and heavy-duty hold-down clamps ensure the
positive vacuum seal. Additionally, it
prevents dust from being accidentally exhausted into a room. |
|Hose & Fittings.
2" tank inlet accepts both a 2" and 1-1/2" diameter
hose (1-1/2" x 12' hose is included).|
The optional 3-1/2" inlet port accepts a
3-1/2" or 4" wide hose, which may be used to extract
airborne dust from work shop grinding projects and chimney cleaning
|24 Gallon Tank. Heavy-duty,
durable, poly with reinforced ribbing for added strength.|
equipped with 8" non-marring rubber rear wheels and 3-1/2"
front casters, side lifting handles and a HD steel push handle.|
the way . . . Who designed the filter system?
a doubt, it's incredible. The bags fill to capacity --
With no loss of suction and the HEPA cartridge filter stays clean -
Contractor, Rumson, NJ
CFM is excellent and my guys love not having to clean the filter which
has always been the case with other vacuums . . .
clean 5 to 6 chimneys and extract their cold before we considering
checking to see if the AIRFlow Bag is full.
vacuum gets too heavy to maneuver before you lose any suction . .
New York, NY