ICS Company Logo.Industrial Contractors Supplies, Inc.
Dust Director Division
15061 Route 30    N. Huntingdon, PA    15642
Ph:  412 . 824 . 6933        Fax:  412 . 824 . 4704        www.dustdirector.com

Home     Fax Order Form     Price Lists, Brochures, Manuals     Testimonials     Contact Us     Clearance

Products:  Dust Control Tools   |  Vacuums, Filtration   |  Slurry / Soil DeWatering  |  Sealant Removal  Diamonds

 The Dust Control & Slurry Solution Company


  Home   >   Power Tools, Chisels, Bits, Screws   >   Concrete Chisels.


Performance for Your Hammer

 

 

Concrete Electric Hammer Chisels

 

Chisel Selections . . .

1 1/8" Hex Shank    |    Spline Shank    |    3/4" Hex   |    SDS Max    |    SDS Plus   |    Makita Small (HK1810)

 

 

 

1-1/8" HEX CHISELS

1-1/8" Hex Shank.

Fits These Hammers:

BOSCH:  11304
B & D:  5027
KANGO:  2500
HITACHI:  H65, H85, H90
MAKITA:  HM1303B, HM1500B, HM1800, HM1810
WACKER:  EH27, BH23
MILWAUKEE:  5338
CHISEL DESCRIPTION PART NUMBER QTY PRICE
20" Moil Point Chisel - 1-1/8" Hex Shank. 20" Moil Point

Demolition applications and starts holes in concrete

AG-705-705 $ 28.00
1" Wide Flat Chisel.  1-1/8" Hex Shank. 1" Wide x 20" Flat Chisel

General purpose chipping, edging and channeling

AG-715-715 $ 28.00
3" Wide Flat Scaling Chisel.  1-1/8" Hex Shank. 3" Wide x 20" Flat
Scaling Chisel

Wide chisel with two cutting angles for chipping dried concrete

AG-725-725 $ 36.00
6" Wide x 5" Floor Scraper.  1-1/8" Hex Shank. Floor Scraper
6" x 5"

General Scraping of tile, linoleum floor and clean-up.

 

AG-310-340
$ 140.00
Floor Scraper
Replacement Blade
AG-310-343 $ 12.00
Floor Scraper Shank.

Floor Scraper Shank Adaptor

Hex Shank
1-1/8" x 16"

AG-741-741

$ 34.00

5" x 18" Asphalt Cutter.  1-1/8" Hex Shank. 5" x 18" Asphalt Cutter

Cuts asphalt or hard ground

AG-735-735 $ 72.00
5-1/2" x 16" Clay Spade.  1-1/8" Hex Shank. 5-1/2" x 16" Clay Spade

Digs clay, shale, hard packed gravel and dirt

AG-745-745 $ 75.00
1-3/4" Bushing Chisel.  1-1/8" Hex Shank. 1-3/4" x 14" Bushing Chisel

Removes excess concrete and roughens surface

751717-A $ 117.00
3" x 22" Digging_Chisel.  1-1/8" Hex Shank. 3" x 20" Digging Chisel

Deep digs into hard ground and asphalt

751621-A $ 81.00
1" ID Ground Rod Driver.  1-1/8" Hex Shank. 1" I.D. x 2-1/4" x 16"

Drives ground rods into the ground

751102-A $ 80.00
 
SPLINE CHISELS

Spline Chisel Shanks.

Fits These Hammers:

BOSCH:  11202, 11203, 11204, 11205, 11209, 11214, 11219, 11220, 11232, 11233, 11244E, 11247, 11248, 11306, 11307, 11310, 11314, 11387
DEWALT:  530K, 531K, 532K, 533K, 551K
HITACHI:  DH38YE, DH40FA, DH40FB, DH50SB, H45FR, H45SB, DH65
MAKITA:  HM08108B, HR3851, HR4040C, HR5000, HM1242C
METABO:  RH66, RH99, 1129, 1130, 6030, 6040, 6046 HM1810
MILWAUKEE:  5309, 5316, 5317, 5318, 5319, 5321, 5327, 5334, 5336, 5340, 5341, 5343, 5344, 5345, 5347, 5348, 5352, 5353
WACKER:  EHG7S, EHB11BLS
CHISEL DESCRIPTION PART NUMBER QTY PRICE
Bull Point Chisel.  Spline Shank. 12" Bull Point

16" Bull Point

Demolition applications and starts holes in concrete

AG-110-192

AG-115-193

$ 11.75

$ 13.80

1" Wide Flat Chisel.  Spline Shank. 1" Wide x 12" Flat Chisel

1" Wide x 16" Flat Chisel

General purpose chipping, edging and channeling

AG-120-190

AG-125-191

 
$ 11.75

$ 13.80

2" Wide Flat Scraping Chisel. Spline Shank. 2" Wide x 12" Flat
Scraping Chisel

Scrapes and chisels with 45-dgree cutting angle

AG-130-195 $ 19.80
3" Wide Flat Scaling Chisel.  Spline Shank. 3" Wide x 12" Flat
Scaling Chisel

Wide chisel with two cutting angles for chipping dried concrete

AG-135-198 $ 23.00
5" x 18" Asphalt Cutter.  Spline Shank. 5" x 19" Asphalt Cutter

Cuts asphalt or hard ground

AG-150-220 $ 93.00
6" Wide x 5" Floor Scraper.  1-1/8" Hex Shank. Floor Scraper
6" x 5"

General Scraping of tile, linoleum floor and clean-up

AG-310-340
$ 140.00
Floor Scraper
Replacement Blade
AG-310-343 $ 12.00
Floor Scraper Shank.

Floor Scraper Shank Adaptor

Spline Shank

AG-165-341

$ 28.00

5-1/2" x 16" Clay Spade.  Spline Shank. 5-1/2" x 16" Clay Spade

Digs clay, shale, hard packed gravel and dirt

AG-145-215 $ 86.00
1-3/4" Bushing Chisel.  Spline Shank. 1-3/4" x 9" Bushing Chisel

Removes excess concrete and roughens surface

AG-170-350

AG-175-351
(Carbide Tooth)

$ 72.00

$ 210.00

Ground Rod Drivers.  Spline Shank. 5/8" I.D. x 10"

3/4" x 10"

Drives ground rods into the ground

AG-155-231

AG-160-232

$ 55.00

$ 58.00

 
3/4" HEX CHISELS

3/4" Hex Shank.

Fits These Hammers:

BOSCH:  11031, 11302, 11305, 11317
DEWALT:  5021K, DW558K
HILTI:  
HITACH:  H55SC
MAKITA:  HM1211B
METABO:  
MILWAUKEE:  5335, 5337
CHISEL DESCRIPTION PART NUMBER QTY PRICE
Bull Point Chisel - 3/4" Hex Shank. 12" Bull Point

Demolition applications and starts holes in concrete

AG-400-400 $ 11.00
1" Wide Flat Chisel.  3/4" Hex Shank. 1" Wide x 12" Flat Chisel

General purpose chipping, edging and channeling

AG-406-406 $ 11.00
2" Wide Flat Scraping Chisel. 3/4" Hex Shank. 2" Wide x 12" Flat
Scraping Chisel

Scrapes and chisels with 45-dgree cutting angle

AG-412-412 $ 17.00
3" Wide Flat Scaling Chisel.  3/4" Hex Shank. 3" Wide x 12" Flat
Scaling Chisel

Wide chisel with two cutting angles for chipping dried concrete

AG-418-418 $ 19.90
6" Wide x 5" Floor Scraper.  1-1/8" Hex Shank. Floor Scraper
6" x 5"

General Scraping of tile, linoleum floor and clean-up

AG-310-340
$ 140.00
Floor Scraper
Replacement Blade
AG-310-343 $ 12.00
Floor Scraper Shank.

Floor Scraper Shank Adaptor

3/4" H

AG-441-441

$ 27.00

1-3/4" Bushing Chisel.  3/4" Hex Shank. 1-3/4" x 9-3/4" Bushing Chisel

Removes excess concrete and roughens surface

AG-450-450 $ 60.00
 
SDS-MAX CHISELS

SDS Max Chisel Shanks.

Fits These Hammers:

BOSCH:  11214EVS, 11216, 11223, 11227, 11230, 11231, 11235, 11240, 11241, 11245, 11263, 11309, 11311, 11312, 11313, 11316, 11318, 11388
DEWALT:  541K, 545K, 25600K, 25900K
HILTI:  TE-F 52, 60, 72, 92;  TE-Y 54, 55, 56, 74, 75, 504, 505, 704, 705, 706;  TE 76
HITACHI:  DH40MA, DH40MB, DH50MB, H45MA, H60MB, DH40HR, H45MR, H60MR
MAKITA:  HM1100C, HM1202C, HR4000C, HR4001C, HR5010C, HR4500C, HR5001C
METABO:  6045
MILWAUKEE:  5308, 5313, 5314, 5315, 5327, 5346, 5336, 5339, 5342
CHISEL DESCRIPTION PART NUMBER QTY PRICE
Bull Point Chisel.  SDS-MAX Shank. 12" Bull Point

16" Bull Point

Demolition applications and starts holes in concrete

AG-230-203

AG-235-204

$ 15.50

$ 19.00

1" Wide Flat Chisel.  SDS-MAX Shank. 1" Wide x 12" Flat Chisel

1" Wide x 16" Flat Chisel

General purpose chipping, edging and channeling

AG-240-205

AG-245-206

$ 15.50

$ 20.00

2" Wide Flat Scraping Chisel. SDS-MAX Shank. 2" Wide x 12"
Scraping Chisel

2" Wide x 16"
Scraping Chisel

Scrapes and chisels with 45-dgree cutting angle

AG-250-210

AG-255-207

$ 21.00

$ 38.00

3" Wide Flat Scaling Chisel.  SDS-MAX Shank. 3" Wide x 12" Flat
Scaling Chisel

Wide chisel with two cutting angles for chipping dried concrete

AG-260-208 $ 37.00
5" x 18" Asphalt Cutter.  SDS-MAX Shank. 5" x 19" Asphalt Cutter

Cuts asphalt or hard ground

AG-275-220 $ 86.00
6" Wide x 5" Floor Scraper.  1-1/8" Hex Shank. Floor Scraper
6" x 5"

General Scraping of tile, linoleum floor and clean-up

AG-310-340
$ 140.00
Floor Scraper
Replacement Blade
AG-310-343 $ 12.00
Floor Scraper Shank.

Floor Scraper Shank Adaptor

SDS Max

AG-285-341

$ 36.00

5-1/2" x 16" Clay Spade.  SDS-MAX Shank. 5-1/2" x 16" Clay Spade

Digs clay, shale, hard packed gravel and dirt

AG-270-215 $ 79.00
1-3/4" Bushing Chisel.  SDS-MAX Shank. 1-3/4" x 9" Bushing Chisel

Removes excess concrete and roughens surface

AG-290-370

AG-290-371
(Carbide Tooth)

$ 69.00

$ 210.00

Ground Rod Drivers.  SDS-MAX Shank. 5/8" I.D. x 10"

3/4" x 10"

Drives ground rods into the ground

AG-280-231

AG-280-232

$ 56.00

$ 59.00

 
SDS-PLUS CHISELS

SDS Plus Shank Chisels.

Fits These Hammers:

BOSCH:  11207, 11210, 11211, 11212, 11213, 11215, 11221, 11222, 11224, 11228, 11236, 11320, 11253, 11255
DEWALT:  514K, 523K, 577K, 566K, 567K, 570K, 25103, 25201, 25203, 25303, 25304
HILTI:  TE 15C, 24, 25, 104, 6C, 6S, 16
HITACH:  DH22, DH24, DH30PB, VR16, VRT22
MAKITA:  HR160, HR1821, HR2000, HR2010, HR2400, HR2410, HR2420, HR2432, HR2450, HR2455, HR2511, HR3000C
METABO:  6010, 6018, 6020, 2024, 6026, KHE24, KHE28, KHE32, UHE22, UHE28
MILWAUKEE:  5302, 5303, 5312, 5320, 5324, 5359, 5360, 5369
CHISEL DESCRIPTION PART NUMBER QTY PRICE
Bull Point Chisel.  SDS-PLUS Shank. 10" Bull Point

Demolition applications and starts holes in concrete

AG-603-603

Also Fits:
HILTI:  TE35, TE46
P/N  AG-003-003

$ 12.50

$ 15.00

1" Wide Flat Chisel.  SDS-PLUS Shank. 1" Wide x 10" Flat Chisel

General purpose chipping, edging and channeling

AG-606-606

Also Fits:
HILTI:  TE35, TE46
P/N  AG-006-006

$ 12.50

$ 15.00

1-1/2" Wide Chisel. SDS-PLUS Shank. 1-1/2" Wide x 10" Flat Chisel

Scrapes and chisels with 45-dgree cutting angle

AG-609-609


Also Fits:
HILTI:  TE35, TE46
P/N  AG-009-009

$ 20.00

$ 27.00

2-1/4" Wide Chisel.  SDS-PLUS Shank. 2-1/4" Wide x 10" Flat Chisel

Wide chisel with two cutting angles for chipping dried concrete

AG-011-011 $ 39.00
 
MAKITA HK1810 SMALL CHISELS

Makita Small Chisel (for #HK1810).

Fits This Hammer:

MAKITA:  HK1810
CHISEL DESCRIPTION PART NUMBER QTY PRICE
Bull Point Chisel.  Makita Small HK1810 Shank. 8-3/4" Bull Point

Demolition applications and starts holes in concrete

B06921 $ 23.00
1-3/16" Flat Chisel.  Makita Small HK1810 Shank. 1-3/16" x 6" Flat Chisel

General purpose chipping, edging and channeling

B07331 $ 27.00
2" Wide Flat Scraping Chisel.  Makita Small HK1810 Shank. 2" x 6"

2" x 9"
Scraping Chisel

Scrapes and chisels with 45-dgree cutting angle

B07347

A-86016

$ 29.00

$ 18.00

4" Floor Scraper.  Makita Small HK1810 Shank. 4" Floor Scraper Assembly

4" Blade Only

General Scraping of tile, linoleum floor and clean-up

12243-4

343411-9


$ 76.00

$ 47.00

Grooving Chisel.   Makita Small HK1810 Shank. Grooving Chisel

5/16"

1/2"

3/4"

Groves or removes material (mortar, caulking) in recessed slots like between brick

 

798277-6

798276-8

798297-0

 

 

$ 20.00

$ 21.00

$ 23.00

 

 

Customer Contact Information Section.

  • THIS PAGE IS NOT CONNECTED TO THE ICS SHOPPING CART

  • Any purchases on this page are send "separately" to ICS Company via eMail

  • Please complete the following form:  "Customer Contact Information", prior to hitting the Send Button (below)

 

Customer Contact Information

Please complete the following contact information so we may contact you.

By providing your contact information and hitting the Send Button (below), an eMail will be sent to ICS with your information.

We do not asked for credit card or payment information on this form.

When we receive your eMail, a knowledgeable ICS Sales Rep will call you to confirm your selections and to answer any questions you may have on the product(s).

We all need to feel comfortable when making a purchasing.  It is only then that we will ask you for your payment information.  Besides, it is always nice and reassuring to hear a voice . . . Just to make sure you are getting the right product and to simply say, "Thank you."

Contact Information:

Name:

Company Name:

Street Address:

City, State, Zip Code:

E-mail Address:

Phone Number:

Please call between the following hours:

(Type in the best hours to reach you at the above phone number.

Fax Number:

Purchase Order / Job Name:

Additional remarks, questions you may ask:

 

Clear - Form Button: 
Press "Clear" to completely reset or clear the form.

Submit - Form Button: 
When you're ready, press "Send" to email your information to ICS Company.

 
 

Home       Fax Order Form       Download .pdf Library       Our Company       Contact Us       Clearance Items

PRODUCTS:   Dust Control Tools  |  Vacuums, Filtration  |  Slurry / Soil DeWatering  |  Sealant Removal  |  Diamonds