Ics-LogoIndustrial Contractors Supplies, Inc.
"New Products . . . New Solutions . . . Consider it Done."
15061 Route 30	N. Huntingdon, PA  15642
Ph.  412-824-6933	Fx.  412-824-4704	www.icscompany.net

Home       Contact Us       Fax Order Form       Download Pricing/ Manuals       August Special       Testimonials

- PRODUCTS -

DUST CONTROL

Angle Grinders
Die Grinders
Fan / Blower
Floor Grinder
Mini Cut-Off Saw
Respirators
Masonry / Concrete
Dust Control Vacuums
DIAMONDS
Crack Chasing
Cup Wheels
Polishing Wheels & Pads
Reciprocating Blades
Router Bits
Segmented Blades
Soff-Cut Elite
Tuck Pointing
Turbo Style Blades 
ADHESIVE/CAULKING
SEALANT REMOVAL
Sealant Cut-Out
Coatings Removal
POWER TOOLS
& ACCESSORIES
Angle Grinders
Circular Saws
Cordless Tools
Cut-Off Saws
Granite Stone Polisher
Chipping Hammers
Demolition Hammers
Polishers
Rotary Hammers
Worm Drive Saws
Concrete Chisels
Concrete Drill Bits
Generators
FASTENERS
HD Concrete
Expansion Anchors
TRAKFAST Cordless Fastening System
Screws

 

Monthly Special:

Discounted or a Free Dustless Guard / Angle Grinder - 

With purchase of a Fine Powdered Dust Control Vacuum.

 

 
2-Motor High CFM Vacuum with Y-Hose Port operates 2 dustless angle grinders.New:  2-Motor w/ Y-Hose Port
271
High CFM Vacuum
    - Low 17.5

Operates 2 Dustless Angle Grinders

Complete with (2) 1-1/2" x 12' hoses

 

 

With 3-Stage CFE® HEPA Filtration
Constant Filtration Efficiency for powdered Masonry & Concrete Dust.

Side view of High CFM Vacuum with Y-Hose Port.

Filters WILL NOT Clog
 - NO Filter Maintenance or Shaking Required -

 

 

 

 

24 Gallon Tank:
HOLDS A LOT OF DUST!
- Cut & Grind All Day -
Without Changing the Filter Collection Bag
- Collects 80 lbs. of Dry, Powder Concrete Dust -

 

Dust Control Guards 

 
Dust Director - Dustless Cutting Guard
 
Cutting vertical brick mortar joints.  Notice the dust being "directed" into the vacuum barrel.

Test by NIOSH with published test results below NIOSH's established Exposure Limit for Silica Dust.  See "TEST RESULTS" (below) for the Dust Director's effectiveness in containing dust.

Extension Cover "unsnapped" to cut in tight areas and to cut a wall's inside corner.

Dust Director can be locked into fixed cutting position or un-locked to swivel on the angle grinder.

 

Features:

bullet

4" - 6" Blade Capacity
(1-5/8" depth-of-cut)

bullet

1/2" Wide Blades

bullet

Complete Blade Visibility

bullet

Cuts a wall's inside corner (unsnap the extension cover)

bullet

Unlimited Attachment Positions (fastens to the angle grinder to your particular angle or cutting style)

bullet

Swivels or Locks in place on the angle grinder (excellent for use on protruding stone walls & cutting wall corners)

bullet

Attaches to a variety of angle grinders (with appropriate collar)

 

Applications:
bullet

Tuck Pointing

bullet

Concrete Spall Repairs

bullet

Cut-Out Projects

bullet

Joint Cleaning

bullet

Crack Chasing

 
 

 

Glitter Bits -
Diamond Router Bits

3 Sizes:

bullet

1/4 x 3-1/2"

bullet

1/4 x 4-5/8"

bullet

1/8 x 3"

Glitter Bits - Diamond Router Bits with Brick Dust Director Dust Control Attachment.

Cutting the vertical brick joint . . . Notice:  No Dust.

Glitter Bit Brick Dust Director:  A dust control attachment for using the Glitter Bits
(Required when using the 4-5/8" Glitter Bit to cutout a single brick).

Glitter Bits:  Designed specifically for grinding Hard S-Mortar

4-5/8" Glitter Bit with Vacuum Hose Port attached to Cut-Out a single brick.

Finished Product:  Individual brick removal.  Cutting through hard "S" mortar - without any dust - and no overcuts into the adjacent mortar.

Applications:

bullet

Vertical Brick Joints (complete the 90° mortar cut-out around a brick)

bullet

Inside Wall Corners (both vertical & horizontal)

bullet

Window & Door Brick Returns (Feather the bit right-up to the window or door frame)

bullet

Recessed Stone Mortar Joints

bullet

Cut-Out a Single Brick (from Hard S-Mortar) Within 6 Minutes

Diamond Glitter Bits - Used in Die Grinders to cut hard mortar joints, concrete, even granite.

Grinds vertical brick joints, window & door brick returns.

Grind the 90 degrees around a brick.

 

Surface Dust Guards -
Dustless Grinding

2 Sizes:

5" Corner Surface Dust Guard:

5" Surface Corner Dust Guard - Side View.

5" Corner Surface Dust Guard - Results.

 

7" Edge Surface Dust Guard:

7" Wall Edging Surface Dust Guard.

7" Wall Edging Surface Dust Guard - Results.

Features:
bullet

Both guards grind along wall edges.

bullet

Fits onto any Angle Grinders or Polisher (collar insert rings are included).

bullet

Diamond cup wheels float easily across floors and into corners (just as if a dust guard wasn't attached).

bullet

Adjustable Rubber Seal controls the dust from escaping . . . even while edging ~ Low RPM Polishers do not even need the Rubber Seal.

 
Surface Dust Guards are Designed for Concrete Floor Grinding & Polishing.

 

Monthly Special Print-Out

2-Page Colored Product / Price List
on the Monthly Special
(Click Here) 

 

Monthly Special:
Purchase a High Power CFM Vacuum
 
Your choice of vacuums:

2-Motor Vacuum Package:
Buy One Dustless Guard, Receive the 2nd one
Free

- or -

Kut-N-Go Vacuum Package:
Receive a
25% Discount on a Dustless Guard

 

 

Monthly Special Order Form

High Power CFM Dust Control Vacuums

HD, Impressively-built machines with "poured-in-place" gasket - beneath the motor head (as opposed to a foam gasket).  Provides an unsurpassed vacuum seal to assure against dust dispersion into rooms and further maximizing vacuum suction power.

With CFE® (Constant Filtration Efficiency) HEPA Filtration:
Collects fine, powder concrete / masonry dust without loss of vacuum suction or filter clogging - Requires no filter maintenance & assures continuous outside cooling air for long motor life (1 year parts / labor warranty).  The HEPA Cartridge filter stays cleans - it will not cake - thus providing incredible filter life without replacements.

 

Kut-N-Go Vacuum
Small, Powerful, Compact - Very Maneuverable

Powerful, Compact (27 x 15") - Designed Specifically for Affordablity and Portability - But Very Well Built.  Includes 1-1/2" x 12' Super Flexibile Hose w/ 2-Stage Fine Dust Filtration.

1-Motor 136 CFM 6.5 Amp
Dust Collection Capacity:  30 lbs.
Size:  14" x 14" x 28"

Includes:  CFE® 2-Stage HEPA Filtration, Filter collection bags (3), 1-1/2" x 12' lightweight flexible hose, 2" vinyl hose connector (to the dustless guard).

Powerful, Low Amp Vacuum Suction - Easily handles an additional 12' hose section.

Price:  $ 365.00  
Item No.  KNG_Vac

 

Replacement Filter Collection Bags, #5110100.  10 / Pack. 
$ 47.00 / Pack.

 

2-Motor Vacuum
Very Durable & Maneuverable

1, 2, & 3 Motor - High CFM - Dust Control Vacuums.

2-Motor 271 CFM 17.5 Amp
Dust Collection Capacity:  80 lbs.
Size:  16" x 21" x 36"

Includes:  CFE® 3-Stage HEPA Filtration, Filter Collection Bags (3), Y-Inlet Hose Port, 1-1/2" x 12' lightweight, flexible hoses (2), 2" vinyl hose connector (to the dustless guard).

Operates 2 Dust Directors from a single 120V, 2-Motor Vacuum.

Price:  $ 1,100.00  
Item No.  DC_2_MOTOR_Vac

 

Replacement Filter Collection Bags, #5110200.  10 / Pack. 
$ 58.00 / Pack.

 

Dust Director Guard
w/ 2-Motor High CFM Vacuum
- Order 1 Get 1 Free -
ITEM NO DESCRIPTION PRICE ORDER QTY
Order 1
Get 1 Free*
* With 2-Motor High CFM Vacuum Purchase.
( Includes Y-Hose Port Assembly & hoses to operate 2 Dust Directors)
DDH Dust Director Guard, 4 - 6" blade capacity. $ 195.00
DDH-MK7 Dust Director w/ Makita 7.5 Amp Grinder $ 260.00
DDH-MET Dust Director w/ Metabo 8 Amp Grinder $ 280.00
DDH-MK13 Dust Director w/ Makita 13 Amp Variable Speed Grinder $ 330.00

 

Dust Director Guard
w/ Kut-N-Go Vacuum
- 25% Dust Director Discount -
ITEM NO DESCRIPTION PRICE
* 25% Price Discount
ORDER QTY
25% Discounted Price*
* With Kut-N-Go High CFM Vacuum Purchase.
DDH Dust Director Guard, 4 - 6" blade capacity. $ 195.00
$ 146.25
DDH-MK7 Dust Director w/ Makita 7.5 Amp Grinder $ 260.00
$ 195.00
DDH-MET Dust Director w/ Metabo 8 Amp Grinder $ 280.00
$ 210.00
DDH-MK13 Dust Director w/ Makita 13 Amp Variable Speed Grinder $ 330.00
$ 247.50

 

Surface Dust Guards
w/ 2-Motor High CFM Vacuum
- Order 1 Get 1 Free -
ITEM NO DESCRIPTION PRICE ORDER QTY
Order 1
Get 1 Free*
* With 2-Motor High CFM Vacuum Purchase.
( Includes Y-Hose Port Assembly & hoses to operate 2 Surface Dust Guards)
5SDG 5" Corner Surface Dust Guard. $ 235.00
5SDG-ME5 5" Corner Surface Dust Guard w/ 5", 8 Amp, 10000 Rpm Metabo Grinder $ 320.00
5SDG-MK5 5" Corner Surface Dust Guard w/ 5", 12 Amp, 2800 - 10500 Rpm Makita Grinder $ 370.00
5SDG-MP7 5" Corner Surface Dust Guard w/ 7", 10 Amp, 600 - 3000 Rpm Makita Polisher $ 428.00
7SDG 7" Edge Surface Dust Guard. $ 320.00
7SDG-MK7 7" Edge Surface Dust Guard w/ 7", 15 Amp, 6000 Rpm Makita Grinder $ 480.00
7SDG-MK9 7" Edge Surface Dust Guard w/ 9", 15 Amp, 6000 Rpm Makita Grinder $ 506.00
7SDG-ME9 9" Edge Surface Dust Guard w/ 9", 15 Amp, 5500 Rpm Metabo Grinder $ 510.00

 

Surface Dust Guards
w/ Kut-N-Go Vacuum
- 25% Surface Dust Guard Discount -
ITEM NO DESCRIPTION PRICE
* 25% Price Discount
ORDER QTY
25% Discounted Price*
* With Kut-N-Go High CFM Vacuum Purchase.
5SDG 5" Corner Surface Dust Guard. $ 235.00
$ 176.25
5SDG-ME5 5" Corner Surface Dust Guard w/ 5", 8 Amp, 10000 Rpm Metabo Grinder $ 320.00
$ 240.00
5SDG-MK5 5" Corner Surface Dust Guard w/ 5", 12 Amp, 2800 - 10500 Rpm Makita Grinder $ 370.00
$ 277.50
5SDG-MP7 5" Corner Surface Dust Guard w/ 7", 10 Amp, 600 - 3000 Rpm Makita Polisher $ 428.00
$ 321.00
7SDG 7" Edge Surface Dust Guard. $ 320.00
$ 240.00
7SDG-MK7 7" Edge Surface Dust Guard w/ 7", 15 Amp, 6000 Rpm Makita Grinder $ 480.00
$ 360.00
7SDG-MK9 7" Edge Surface Dust Guard w/ 9", 15 Amp, 6000 Rpm Makita Grinder $ 506.00
$ 379.50
7SDG-ME9 9" Edge Surface Dust Guard w/ 9", 15 Amp, 5500 Rpm Metabo Grinder $ 510.00
$ 382.50

 

Glitter Bit Dust Controllers
w/ 2-Motor High CFM Vacuum
- Order 1 Get 1 Free -
ITEM NO DESCRIPTION PRICE ORDER QTY
Order 1
Get 1 Free*
* With 2-Motor High CFM Vacuum Purchase.
( Includes Y-Hose Port Assembly & hoses to operate 2 Surface Dust Guards)
GB-DM Glitter Bit - Brick Dust Director $ 119.00
GB-DM_DG Glitter Bit - Brick Dust Director w/ Makita 6.6 Amp, 7000 - 28000 Rpm Die Grinder $ 364.00

 

Glitter Bit Dust Controllers
w/ Kut-N-Go Vacuum
- 25% Dust Controller Discount -
ITEM NO DESCRIPTION PRICE
* 25% Price
Discount
ORDER QTY
25% Discounted Price*
* With Kut-N-Go Vacuum Purchase.
GB-DM Glitter Bit - Brick Dust Director $ 119.00
$ 89.25
GB-DM_DG Glitter Bit - Brick Dust Director w/ Makita 6.6 Amp, 7000 - 28000 Rpm Die Grinder $ 364.00
$ 273.00

 

Accessories - Glitter Bits
ITEM NO DESCRIPTION PRICE ORDER QTY
GB18275 1/8 x 3" Glitter Bit $ 68.00
GB14350 1/4 x 3-1/2" Glitter Bit $ 70.00
GB14550 1/4 x 4-5/8" Glitter Bit $ 110.00
 

 

EASY ON-LINE ORDERING / PRODUCT QUESTION FORM

We do not process Credit Card Transactions via On-line.

After you "send" your completed form, a knowledgeable ICS sales rep with call you to confirm your order and to answer any questions you may have.

Besides, it's always nice and reassuring to hear a voice . . .

Just to make sure you are getting the right product . . .
and to simply say, "Thank you."


Directions for completing the above E-Mail Order Form.

1.  Enter Product Quantity Amounts.

2.  Enter Contact / Company Information (below),

3.  Hit the "Send" button to E-mail the Form to ICS.

ICS will review and call you to discuss your E-Mail Order Submittal.

 

Company / Contact Information

My Name is:

Company Name:

Street Address:

City, State, Zip Code:

My e-mail address is:

Please call me to confirm / review my order at this Phone Number:

Please call between the following hours:

(Type in the best hours to reach you at the above phone number.
 

Purchase Order / Job Name:

 

Remarks / Ordering Information / Questions / Brand of Angle
Angle Grinder / Dust Director to Fit What Angle Grinder / 
Diamond Blade Package . . .


(Type in any additional information, questions, order clarification remarks you may have.) 

Press "Clear" to completely reset or clear the form: 

When you're ready, press "Send": 
to submit your information to ICS Company.

 

Home   |  Contact Us   |  Fax Order Form   |   Price Lists / Manuals   |   About ICS

ICS Company, Inc., 15061 Route 30, N. Huntingdon, PA  15642
Customer Service: (412) 824-6933    Fax: (412) 824-4704
Last Modified:  August 20, 2008