ICS Company Logo.Better Business Accredited Company: ICS CompanyIndustrial Contractors Supplies, Inc.
Dust Director Division
15061 Route 30    N. Huntingdon, PA    15642
Ph:  412 . 824 . 6933        Fax:  412 . 824 . 4704        www.dustdirector.com

Home     Fax Order Form     Literature, Price Lists     Testimonials     Contact Us     Clearance!

Safety  |  Dust Control Products   |  Vacuums, Filters, Accessories   |  Slurry De-Watering  |  Sealant Removal  |  Diamonds  |  Chisels, Bits, Screws

 The Dust Control & Slurry Solution Company

  Home   >   Dust Control Products   >   Glitter Bit Features   >   Glitter Bit Pricing.

Product Pricing & Ordering Section - Two (2) Pricing Options:

  • Individual Glitter Bits - Purchase just the Glitter Bits

  • Variable Speed Die Grinder - Only a variable speed die grinder is to be used with the Glitter Bits

  • Vacuum Package - 15% Discount on a Dust Director Vacuum with purchase of the Dust Controller.

Note:  Our Customer Contact Information Section is at the bottom of this page.  The section has to be completed prior to sending us your order.

 

Glitter Bits

Glitter Bits

Individual Glitter Bit Pricing

 Glitter Bit Tools

Variable Speed Die Grinder & Glitter Bit Dust Controller.

Variable Speed Die Grinder & Dust Controller

 Vacuum Packages

Glitter Bit Dust Control - Vacuum Packages.

Vacuum Packages
 15% Vacuum Discounts
 2 For 1 Vacuum Package

 

 

Individual Glitter Bit Pricing
 For use in variable speed die grinders

IMPORTANT:  Glitter Bits are only for use in variable speed die grinders.  The safe RPM range for Glitter Bits is between 8,000 and 15,000 RPM.  As the Glitter Bits wear, they'll naturally become uneven which will cause the die grinder to vibrate.

The variable speed feature on the die grinder enables you to quickly lower the die grinder's RPM speed for continued smooth operation, safety, and longer life of the Glitter Bits.
 

Diamond Tuck Pointing Router Bit.

Product Made in the USA.

 Item No. Size Price Qty
GB14550 1/4" X 4-5/8" $ 110.00
GB14350 1/4" x 3.5" $ 80.00
GB18275 1/8" x 3" $ 75.00

 

Testimonial 
"I cut over 2000 feet of vertical brick joints using the 3-1/2" Glitter Bit.  And it still has life . . .

I also used the same bit with a flooring chisel to removal at least twelve (12) brick that were broken.

I know a lot of masons from the Maryland area will be contacting you . . . we are all impressed."

Masonry Restoration Company, Frederickburg, MD

 

Variable Speed Die Grinder & Dust Controllers

Specific tools & attachments for using the Glitter Bits.
Glitter Bit Dust Controller for Brick.Glitter Bit - Tile Dust Controller. Dustless grout removal from tile or panels.Glitter Bit - Attachments

Makita variable speed Die Grinder, with long neck - Used with the Glitter Bits & the Dust Controller.

 

  • Durable Productivity
    Made of lightweight aluminum to provide years productive service.

  • Complete Blade Visibility

  • 4" - 6" Blade Capacity

  • Extension cover "unsnaps" to expose two cutting edges on the blade
    By exposing two cutting edges:
    - Your able to go in and out of a wall's inside corner
    - Grind in tight areas
    With complete dust containment.

  • Lightweight, durable, complete blade visibility, 6" blade capacity, multiple cutting positions . . .
  Variable speed die grinder. Glitter Bit Dust Controller for Brick.

Dust Controller accepts a 1-1/2" diameter hose, includes vinyl hose cuff.

 

 Glitter Bit - Tile Dust Controller. Dustless grout removal from tile or panels.

1-1/2" vacuum hose w/ vinyl hose cuff fits into the dust controller.
Brand Makita Brick Dust Controller Tile Dust Controller
Model GDO800C GB-BDC GB-TDC
Price $ 245.00
 		$ 119.00
 		$ 140.00
Amp 6.6 · Simple attachment to the Makita GD0800C Die Grinder
· Provides easy insertion & removal of the vinyl hose cuff - securely holds a 1-1/2" diameter hose
· Vinyl hose cuff included with the Dust Controller to simplify handling and maneuvering of the vacuum hose plus
· Designed specifically to control dust while  grinding-out individual bricks

Why make a mess and deal with the clean-up?  The Glitter Bit Brick Dust Controller is a simple attachment that is extremely easy to use for all Glitter Bit applications.

Product Made in the USA.

 

· Simple attachment to the Makita GD0800C Die Grinder
· Provides easy insertion & removal of the vinyl hose cuff - securely holds a 1-1/2" diameter hose
· Vinyl hose cuff included with the Dust Controller
· Smoothly slides along the surface for precise control with 3 straight edges
· Dust is extracted into the window port
· Designed specifically for grout removal from ceramic tile

Product Made in the USA.
Length 14-5/8""
Weight 3.5 lbs
RPM Speed 7,000 - 28,000
 

FEATURES

· For use with all Glitter Bits
· Accepts the Glitter Bit Dust Controllers
· Electronic speed control maintains the grinder's speed under load
· Slender double-neck aluminum housing for easy handling and for reaching into tight areas
· Variable Speed Dial, sets and controls the die grinder's RPM speed to the correct rating of a Glitter Bit

 

 

Vacuum Package ~ 1, 2, 3-Motor Dust Director Vacuums

15% Vacuum Discount with purchase of a Variable Speed Die Grinder or Glitter Bit Dust Controller

1-Motor 2-Motor 3-Motor
Kut-N-Go Model: Small, Compact - Powerful Suction w/ Lighweight Mobility. 2 Motor Power, Portability, Durability & Collection Volume in a 1 Motor, Portable Vacuum. 2-Motor, 8.5 Amp / Motor - 265 CFM, 17 gallon tank w/ HD compact cart. DC-2-Motor W/D Vacuum. 24 gallon HD Poly Tank w/ wheels. 2-Motor, 19.5 net Amps. 150 lbs. dry silica dust collection capacity. DC-3-Motor W/D Vacuum. 24 gallon HD poly tank. 19.5 net Amps. 150 lbs. dry silica dust collection capacity. Complete with Y-Hose Port Assembly.

 

Dust Director Vacuums - Equipped with Self-Cleaning AIRFlow HEPA Filtration:

  • Never Stop to Unclog Filters.  Never turn-off the vacuum to clean or unclog the filter.

  • Never Create a Mess.  Maintain 100% suction power - Guarantee.

Extracts Volumes of Silica Powder Dust . . . Not Just a Few Pounds

Spend Less Time Cleaning Filters & Emptying the Tank --

And More Time Getting the Job Done

AIRFlow HEPA Filtration:  Tanks fill completely with silica powder dust WITHOUT suction drop.  Each vacuum includes two (2) filter systems, its your choice to use either one:  Flutter Filter - Eliminates using filter bags in the vacuum.  Or use the Clean Extreme Filter Bags - Burst and tear resistant, the bags collect everything  (dry or wet) without blinding plus EVERYTHING stays clean, including the tank and the cartridge filter.

 

  • Flutter Filter Basket: 96.5% Efficiency @ 0.3 microns. Uses the vacuum's turbulence inside the tank to constantly flutter - keeping the filter from caking.Flutter Filter Basket.  Utilizes the spiraling whirlpool action inside the vacuum tank to keep its loose fitting media constantly in shaking and fluttering motion - Naturally.  Dry powders are preventing from accumulating and caking its surface.  No electronics are use to keep this filter constantly moving, shaking, fluttering and pulsing.

    Additionally, the floating cage is free floating as it also shakes and knocks against the inside walls of the filter media.  Further helping to increase the filter's effectiveness in maintaining strong suction power for increased collection yields.  Everything is Natural Occurring - No Electronics . . .

  • Clean Extreme Filter Collection Bags (3 included).  Collects dry powder dust and wet debris - even at the same time.  Bags will not tear or burst inside the tank like paper filter bags.  The outside of the bag is kept clean which keeps the tank and the HEPA cartridge filter clean.  Removal and disposal of the filter bag is clean, safe, without tearing, without a mess - helping to confirm to environmental and health regulation.

 

Extreme Filter Bags install on the tank's inlet port - Tanks stay clean, cartridge filters stay clean - even after collecting 140 lbs. of dry concrete dust.

HEPA Cartridge Filter Stays Clean
Everything Stays Clean . . .

 Clean/Extreme Filter Bag (shown completely full with 150 lbs of silica dust). Also note the bag, tank and HEPA cartridge filter remain clean.

Bags Do Not Burst -
Collects Dry Powder to Wet Debris
Without Changing the Bag

 Clean / Extreme Filter Bag removed from tank - holding 140lbs. of dry concrete dust - inside of the tank remains clean.

Large Collection Yields
- To the Tank's Inlet Port Without Suction Drop

 

 
- Vacuum Pricing -

Vacuums include:  1-1/2" x 12' lightweight, flexible hose w/ 2" soft vinyl hose cuff for easy Dust Director attachment;  2" inlet port on the tank w/ option to use the available 2" x 25' / 50' hose (ideal for keeping the vacuum on the ground while working overhead), & complete AIRFlow HEPA Filtration System:  Flutter Filter Basket & Clean Extreme Filter Bags (3).

Vacuum

Model No.

 Kut-N-Go Model: Small, Compact - Powerful Suction w/ Lighweight Mobility.

Kut-N-Go
1-Motor

2 Motor Power, Portability, Durability & Collection Volume in a 1 Motor, Portable Vacuum.

TP-12 PLUS
1-Motor

 2-Motor, 8.5 Amp / Motor - 265 CFM, 17 gallon tank w/ HD compact cart.

DC-2S
2-Motor

DC-2-Motor W/D Vacuum. 24 gallon HD Poly Tank w/ wheels. 2-Motor, 19.5 net Amps. 150 lbs. dry silica dust collection capacity.

DC-2
2-Motor

DC-3-Motor W/D Vacuum. 24 gallon HD poly tank. 19.5 net Amps. 150 lbs. dry silica dust collection capacity. Complete with Y-Hose Port Assembly.

DC-3
* Special:
 Free Dust Director & Metabo 8 Amp Angle Grinder

· 120 Volt
· 8.5 Amp Motor
· 136 CFM
· 97" H20
· 10 gallon poly tank
· 30 lb dust yield 
· Size:  12" x 27" 
· Weight:  15 lbs.

· A+ for handling & use on scaffold

· 120 Volt
· 1500 Watt, 12.0 Amp Motor
· 135 CFM
· 126" H20
· 12 gallon HD Compact Poly Tank
· 40 lb dust yield
· Size:  12/14" x 29" 
· Weight:  28 lbs.

· 2-Motor Power in a Compact 1-Motor Vacuum

The most impressive 1-Motor Vacuum you'll ever own ~ Guarantee.

 · 120 Volt
· 8.5 Amp/Motor
· 265 CFM
· 97" H20
· 17 gallon steel tank
· 100 lb dust yield 
· Size:  16" x 38"* 
· Weight:  38 lbs.*

· Vacuum detaches from cart for using just the vacuum on scaffold
· Flat bottom tank makes it ideal for use on scaffold
· HD, compact transport cart w/ side bars - protects the steel tank from dents.

* Size and weight of cart not included.

 · 120 Volt
· 8.5 Amp/Motor
· 265 CFM
· 97" H20
· 24 gallon HD Compact Poly Tank
· 140 lb dust yield 
· Size:  18" x 21" x 36" 
· Weight:  48 lbs.

· A+ for maneuverability & use on scaffold!
· Collect yield lets you grind all day without having to empty the tank.

· 120 Volt
· 6.5 Amp/Motor
· 295 CFM
· 83" H20
· 24 gal HD Compact Poly Tank
· 140 lb dust yield
· Size:  18" x 21" x 36" 
· Weight:  50 lbs.

3-Motor Vacuum operates 2 Dust Control Angle Grinder

· DC-3 Vacuum is the same vacuum as the DC-2 but with a 3rd motor.  The 3rd motor is required for operating 2 Dust Control Angle Grinders from a single vacuum.

· Optional 2" x 25/50' hose is available for added versatility.
Vacuum Price

15% Vacuum Discount Price with Glitter Bit Dust Controller Purchse

 $385.00

$327.25

 $595.00

$505.75

$950.00

$807.50

 $1,100.00

On Special:
 $880.00

 $1,570.00

$1,334.50 *
Dust Director w/ Extension Cover unsnapped: 6" Blade Capacity.*Free Dust Director & Metabo 8 Amp Angle Grinder plus 15% Vacuum Discount on the DC 3-Motor Vacuum - with Die Grinder & Glitter Bit Dust Controller Purchase.
 DC 3-Motor Vacuum operates 2 Dust Control Tools from 1 Compact, Portable, Powerful Vacuum.

Package includes:

  • DC-3 Motor Vacuum w/ AIRFlow HEPA Filtration
  • Y-tank connector
  • (2) 1-1/2" x 12' hoses
  • (1) Dust Director & Angle Grinder
  • (1) Die Grinder & Glitter Bit Dust Controller.

 

 

Customer Contact Information Section.

Please complete this section prior to hitting the Send Button (below).

 

Customer Contact Information

This completed Order Form simply generates an email that is sent to ICS Company.  We do not ask for credit card or payment information on this form.  Please complete the following contact information so we may contact you.

When we receive your email, a knowledgeable ICS Sales Rep will call you to confirm your selections and to answer any questions you may have on the product.

We all need to feel comfortable when making a purchasing.  It is only then that we will ask you for your payment information.  Besides, it is always nice and reassuring to hear a voice . . . Just to make sure you are getting the right product and to simply say, "Thank you."

Contact Information Section:

Name:

Company Name:

Street Address:

City, State, Zip Code:

E-mail Address:

Phone Number:

Please call between the following hours:

(Type in the best hours to reach you at the above phone number.

Fax Number:

Purchase Order / Job Name:

Additional remarks, questions you may ask:

 

Clear - Form Button: 
Press "Clear" to completely reset or clear the form.

Submit - Form Button: 
When you're ready, press "Send" to email your information to ICS Company.

 
 

Home       Fax Order Form       Download .pdf Library       Our Company       Contact Us       Inventory Elimination

PRODUCTS:   Dust Extraction Tools  |  Vacuums  |  Slurry  |  Sealant Removal  |  Diamonds  |  Bits/Chisels