Dust Control Guards
Makita Surface Dust Guards – 5″ & 7″, Makita Drilling Dust Guards, Makita Drilling & Chipping Dust Guards, Makita Chipping Dust Guard
Showing all 5 results
Makita Drilling & Chipping Dust Guards. For Makita SDS Max Rotary & Demolition Hammers.$145.00 Add to cart
Makita Surface Dust Guards – 5″ & 7″
#195236-5 5″ Surface Dust Guard – Fits Makita 4-1/2″, 5″, 6″ angle grinders (except 9005Bt) and the 9227C (7″) Polisher
Features a spring-loaded suspension system that keeps the shroud flush to the surface during movement and compensates for cup-wheel wear. The soft brushes help contain the dust and allow for smooth movement over the work surface.
The removable edge piece allows for surface grinding along wall or other object edges. The outside diameter of the extraction port (1-7/16″) allow the guard to be use with standard 1-1/2″ vacuum hoses. This new dust shroud is ideal for concrete finishing and planing, paint or surface coating removal, blending concrete seams and “rain out” (removal of “dead” concrete from surfaces after rain, foliage and dirt have dirty the surface).
#195386-6 7″ Surface Dust Guard – The Makita 7″ Surface Dust Guard does not fit their 9227C Polisher. Instead, use our red 5″ and 7″ Surface Dust Guard (below) with the 9227C.
A key point of difference between competitor dust shrouds and the Makita Dust Guard is the 3-spring suspension system that keeps the shroud flush with the surface during movement and compensates for cup-wheel wear. The soft brushes are engineered to prevent dust from escaping while helping to move the tool more easily over the surface.
The added convenience feature is the removable edge piece to allow for surface grinding along wall or other object edges. The guard has a direct-connection dust port (outer diameter: 1-7/16″) for use with most commercial vacuum hoses. The 7″ Surface Dust Guard is ideal for concrete finishing and planning, paint or surface coating removal, blending concrete seams and “rain out”.
Makita Drilling Dust Guards. For Makita SDS Plus Rotary Hammers.
#193472-7K Complete Kit – For Makita SDS Plus Combination Rotary / Chipping Hammers, Corded and Cordless
Makita Dust Guard is for drilling – Fits Makita SDS Plus Rotary / Chipping Hammers
Complete “ICS” Dust Control Kit features:
- 17″ hose
- Telescoping spring-loaded barrel
- Depth stop
- Bit size adjustment knobs
- Built-in ruler
- 3/4″ x 10′ connection hose (gray)
- Hose cuff for attachment of gray hose to 1-1/2″ vacuum hose (not shown).
Makita Drilling & Chipping Dust Guards.
For Makita SDS Max Rotary & Demolition Hammers.
#196074-8K Complete Kit – For Makita SDS Max Combination Rotary / Chipping Hammers
The Makita Dust Guard Kit (below) includes dust boots for both drilling and chiseling – Fits Makita SDS Max Rotary / Chipping Hammers.
Complete “ICS” Dust Control Kit includes both dust guards for drilling and chisels
- 2-piece drilling boot and depth rod extensions, for use with bits up to 24″ overall length
- 2-piece demolition (chisel) boot
- Vibration-absorbing handle, engineered for increased comfort on the job
- Replaceable nozzle tips to help protect boot from excessive wear
- 3/4″ x 10′ connection hose (gray)
- Hose cuff for attachment of gray hose to 1-1/2″ vacuum hose (not shown)
- Durable blow molded plastic carry case for easy storage and transporting
Makita Chipping Dust Guard.
For Makita Demolition Hammers.
#196571-4 Complete Kit – For all Makita Demolition Hammers (1-1/8″ Hex and SDS Max)
Dust Control Kit for Makita Demolition Hammers / Chisels.
Fits all Makita Demolition Hammers, 1-1/8″ Hex Shank and SDS Max Hammers.
For use with demolition hammers and rotary hammers (that accept SDS-Max). Engineered to help reduce dust created from breaking and chipping concrete.
6-Piece Kit for Increase Compatibility. For use with a jobsite vacuum (sold separately), and is compatible with Makita SDS-Max Rotary hammers and Demolition Hammers. After attaching the dust cover and hose assembly to the shaft of the bit the user can attach the hose to the hammer using one of two hose holders which are designed to fit the hammer’s handle.
Additionally, a third hose holder allow the user to attach the hose to the power cord. This versatility allows the user to direct the hose to the jobsite vacuum in the most efficient manner, and to keep it out of the way during use. The kit also includes an additional hose joint for increased compatibility. The attached is engineered to use with bull point or chisel bits commonly used in concrete demolition applications.
The Dust Extraction Attachment is a kit and includes a dust cover, hose (62-1/2″ L), hose holder for the power cord, hose holder for the “D” side handle, hose holder for straight side handle, and hose joint (1-7/8″ID, 2″ OD).